|
WAW-600D
Collect
Product solution: D-type machine WAW-600D 1. Product Name: Microcomputer-controlled Electro-hydraulic Servo Universal Testing Machine III. Applicable Standard: GB/T 2611-2007 "General Technical Requirements for Testing Machines" JB/T 7406.1-1994 "Terminology for Testing Machines - Material Testing Machines" GB/T 16826-2008 "Electro-hydraulic Servo Universal Testing Machine" GB/T 16825.1-2008 "Verification of Static Uniaxial Testing Machines - Part 1: Verification and Calibration of the Force Measuring System of Tension and (or) Compression Testing Machines" GB/T 22066-2008 "Evaluation of Computer Data Acquisition Systems for Static Uniaxial Testing Machines" JJG 139-1999 "Tension, Compression, and Universal Testing Machines" JB/T 6146-2007 Technical Conditions for Extensometers JB/T 6147-2007 "Technical Requirements for Packaging, Packaging Marking, Storage and Transportation of Testing Machines" GB/T 228-2010 "Metallic Materials - Tensile Testing Method" GB/T 7314-2005 "Metallic Materials - Compression Testing at Room Temperature" GB/T 232-2010 "Metallic Materials - Bend Test Method" IV. Product Introduction and Features: ¡ô Product Introduction: The WAW-D microcomputer-controlled electro-hydraulic servo universal testing machine is an upgraded and improved mid-range model based on the original B-type machine. Drawing on the long-term production experience and customer feedback from the B-type machine, its performance and stability have been significantly enhanced, and the failure rate has been reduced. In subsequent market research, the cost-effective advantages of the D-type machine have been fully highlighted, making it highly favored by mid-range customers. This testing machine is a crucial instrument for evaluating the physical, mechanical, process, and structural seismic properties of various materials and their products under diverse environmental and simulated conditions. It can perform tests on metallic or non-metallic materials, including tensile, compressive, bending, and shear tests, according to relevant standards. The machine can determine various performance indicators such as tensile strength, yield strength, specified non-proportional extension strength, and elastic modulus. It offers closed-loop control functions, including constant rate loading, constant rate deformation, constant rate displacement, and constant rate strain. This machine is ideal for verifying the process qualification performance of materials or products. Product standard technical parameters: (1) Host parameters: Host parameter: WAW-600 D Number of columns: 6 columns (4 vertical columns, 2 lead screws) Maximum distance between pliers jaws (mm) 650 Maximum compression space (mm) 570 Effective distance between columns (mm) 460 Maximum outer diameter of the oil cylinder (mm) ¦µ250 Piston diameter (mm) ¦µ170 Maximum piston stroke (mm) 200 Column diameter (mm) ¦µ65 Lead screw diameter (mm) Tr70 Workbench size (mm): 660¡Á510 Workbench thickness (mm) 80 Beam thickness (mm) 300 (II) Measurement parameters: Measurement parameter: WAW-600 D Maximum test force (kN) 600 Testing machine level: Level 1 Effective measuring range of test force: 2%-100%FS Test force resolution: 1/500000 of full scale (one resolution throughout the entire range, without any sub-divisions) Test force measurement accuracy ¡À1% Displacement measurement resolution: 0.01mm Displacement measurement accuracy ¡À0.5% Deformation measurement range: 2%-100%FS Deformation measurement resolution: 0.001mm Deformation measurement accuracy: ¡À1% (III) Attached parameters: Attached parameter: WAW-600D Clamping method: Wedge-type hydraulic built-in automatic clamping Round sample clamping range (mm) ¦µ13-¦µ26 ¦µ26-¦µ40 Plate sample clamping range (mm) 0-15, 15-30 Plate specimen clamping width (mm) 80 Upper and lower press plate size (mm) ¦µ160 Bending roller diameter (optional) ¦µ30 Bending roller diameter (mm) ¦µ30 Maximum width of curved support roller (mm) 140 Maximum spacing between bending rollers (mm) 320 Maximum allowable bending degree (mm) 100
|
