WDW-50E

Microcomputer controlled electronic universal testing machine

1、 Product Name: Microcomputer Controlled Electronic Universal Testing Machine

2、 Product functions and features:

The WDW-50E machine is a new generation of microcomputer controlled electronic universal testing machine. Mainly used for testing mechanical performance indicators such as tension, compression, bending, shear, peeling, and tearing of various metal, non-metal, and composite materials. The system adopts microcomputer closed-loop control, which has a wide and accurate loading speed and force measurement range, and has high accuracy and sensitivity in measuring and controlling loads and displacements. This equipment is suitable for manufacturing industries such as metals, adhesives, pipes, profiles, aerospace, petrochemicals, waterproofing membranes, wires and cables, textiles, fibers, rubber, ceramics, food, pharmaceutical packaging, geotextiles, films, wood, paper, as well as product quality supervision departments at all levels. It is also suitable for teaching demonstrations in colleges and universities.

The design of the testing machine host has the characteristics of beautiful appearance, easy operation, stable and reliable performance, no pollution, low noise, and high efficiency. The design of the auxiliary equipment is matched with the host, with a wedge-shaped translational structure and manual rotation clamping, and the sample is not subjected to additional force. Convenient, reliable, and non slip clamping.

3、 Product Structure and Performance:

◆ Host structure:

The host consists of an upper crossbeam, a moving crossbeam, and a worktable connected by columns and ball screws to form a rigid floor standing frame structure. The Panasonic AC servo motor and AC servo speed control system are installed below the worktable. The AC servo motor drives the double ball screw to rotate through a synchronous toothed belt reduction mechanism, thereby driving the moving crossbeam to move up and down to achieve loading and testing of the sample.

◆ System composition:

The measurement and automatic control system consists of high-precision sensors, high-precision electronic extensometers, servo motors, dedicated independent controllers, dedicated measurement and control software, and Lenovo mainstream brand microcomputers.

4、 Product standard technical parameters:

1. Maximum stretching/compression space: 750mm;

2. Maximum test width: 600mm;

3. Maximum travel of crossbeam: 1350mm

4. Maximum test force: 50 kN;

5. Testing machine level: 0.5;

6. Test force measurement range: 0.4% -100% FS;

7. Measurement accuracy of test force: ± 0.5%;

8. Test power resolution: 1/500000 of the full range (there is only one resolution for the full range, without grading);

9. Displacement measurement accuracy: ± 0.5%;

10. Displacement measurement resolution: 0.001mm/0.001 μ m;

11. Deformation measurement accuracy: ± 0.5%;

12. Deformation measurement resolution: 0.001mm;

13. Displacement control speed range: 0.001-500mm/min;

14. Accuracy of displacement control rate: within ± 1.0% of the set value when the rate is less than 0.01 mm/min;

When the speed is ≥ 0.01 mm/min, within ± 0.2% of the set value;

15. Stress and strain control rate adjustment range: 0.005-5% FS/S;

16. Stress and strain control rate adjustment accuracy: When the rate is less than 0.05% FS, it is within ± 2% of the set value;

When the rate is ≥ 0.05% FS, it is within ± 0.5% of the set value;

17. Host size: 950 × 650 × 2170mm;

18. Weight: 800kg;

19. Power: 1.5kW;

20. Power supply: single-phase 220V ± 10%, 50Hz;

21. Environmental requirements: no vibration, no dust; Room temperature ranging from 10 ℃ to 35 ℃; Humidity ≤ 80%;

There is no vibration around, no corrosive medium, and no strong magnetic field interference;